A special levy notice gives you an amount to pay. It rarely tells you whether that amount is unusually high.
StrataClear has analysed hundreds of thousands of strata report pages. Across the completed NSW special levies used for these benchmarks, the median was about AUD $1,200 per unit per special levy, while the average was about AUD $4,700. Those figures cover the full obligation across instalments, rather than a single payment.
That gives a buyer a starting point. It does not give a verdict on the building. A levy above the benchmark may fund clearly defined repairs, while a smaller amount may leave important work unresolved. The useful question is both “How does this compare?” and “What does it actually cover?”
Enter your full per-unit amount to see roughly where it sits: Compare your special levy.
What do the NSW special levy benchmarks show?
The average special levy per unit was about AUD $4,700 in the selected completed NSW records analysed by StrataClear. The median was much lower, at about AUD $1,200, making it useful to consider both measures.
| Measure | Rounded amount per unit, per special levy | What it tells you |
|---|---|---|
| Median | About AUD $1,200 | The midpoint of the recorded obligations |
| Average (mean) | About AUD $4,700 | The arithmetic average, influenced by larger levies |
| Middle half | About AUD $500 to AUD $3,400 | The central range of recorded amounts |
About 85% of the recorded obligations were below AUD $5,000, while about 10% were AUD $10,000 or more. These are rounded comparisons, not cut-offs between acceptable and unacceptable costs.
View percentages by amount
| Amount band | Share of levies |
|---|---|
| $50 to under $100 | 4% |
| $100 to under $200 | 6% |
| $200 to under $400 | 11% |
| $400 to under $800 | 18% |
| $800 to under $1,600 | 21% |
| $1,600 to under $3,200 | 13% |
| $3,200 to under $6,400 | 16% |
| $6,400 to under $12,500 | 4% |
| $12,500 to under $25,000 | 2% |
| $25,000 to under $50,000 | 3% |
| $50,000 to under $100,000 | 3% |
The chart shows the percentage of recorded levies in each amount band, not each band’s share of all dollars raised. Percentages are rounded, and the amount bands have different widths, so they are not equal dollar intervals.
Source and scope: StrataClear analysis of selected completed NSW levy records. These benchmarks provide indicative context, rather than a representative market survey or a fair-price test. They are not Australian or NSW population averages.
Where does your special levy sit?
Enter the full special-levy total for your unit, across all instalments, to see its approximate percentile. This estimates the percentage of recorded obligations below your amount.
The comparison uses rounded benchmark data from the selected completed NSW records. It is not a NSW or Australian population percentile or an assessment of whether the charge is fair.
Why is the average so much higher than the median?
Larger levies pull the average upwards. The median identifies the middle amount, so it is less affected by especially large obligations.
Both figures are useful, but they answer different questions. The median offers a sense of the middle of this distribution. The mean shows what happens when all recorded amounts, including the largest obligations, enter the calculation.
Neither measure is a recommended budget for your apartment. A building’s repair needs do not become smaller because its levy exceeds a benchmark, and a below-median amount does not establish that all necessary work has been funded.
For a buyer, the practical value is orientation: understanding where the amount sits before investigating why it is there.
Are you comparing the whole levy or one instalment?
Compare the full special-levy obligation for your unit, including every instalment. Comparing one payment with a total can make the same liability look very different.
The NSW Government’s levy guidance explains that an owners corporation can introduce a special levy when it has insufficient money to cover an expense, such as major repairs. It also discusses arranging instalments to match when funds are needed.
Consider a hypothetical Sydney buyer whose records show a special levy payable in four instalments of AUD $1,000. The full obligation is AUD $4,000. For comparison with these benchmarks, the relevant figure is AUD $4,000, even if only one instalment appears on the latest notice.
There are other distinctions to check:
- Your unit versus the whole scheme. A project budget or scheme-wide levy resolution is not the amount payable by one owner.
- Special versus regular levies. These benchmarks exclude ordinary administrative fund and capital works fund contributions.
- One obligation versus annual costs. The figures do not describe the annual cost of owning an apartment.
The NSW Government also confirms that annual and special levies are based on each owner’s unit entitlement, the allocation that determines their share of contributions. An equal split across apartments may therefore differ from the amount on your own levy notice.
Does a higher special levy mean a worse building?
A higher levy identifies a larger financial obligation. It does not, by itself, establish mismanagement, an unreasonable repair price or a poor purchase.
Imagine comparing Sydney apartments with the same AUD $10,000 per-unit obligation. In one hypothetical scenario, the levy funds a defined repair scope supported by quotes and an agreed payment schedule. In another, the amount funds an initial stage while the remaining work is still being assessed.
The benchmark places both amounts in the same part of the distribution. The documents reveal the difference in what is funded and what remains uncertain.
Useful questions include:
- What work does the money cover? Look for the scope, supporting technical assessments and the reason the work is proposed.
- How settled is the cost? Distinguish an approved amount supported by quotes from an early estimate. Check whether contingencies and later stages are addressed.
- How does it fit the building’s funding? Compare the proposed expenditure with available funds and other planned commitments.
- What remains after this levy? Look for unfinished investigations, unresolved defects or further funding proposals relating to the same work.
The NSW Government’s financial management guidance explains that the annual budget estimates expenses and determines levy amounts, with the capital works fund plan informing longer-term needs. Our guide to assessing a capital works fund beyond its balance provides further context for that comparison.
How often can you expect a special levy?
These dollar benchmarks cannot reliably tell you how frequently a building will raise a special levy. They describe amounts for completed obligations, rather than a recurring annual charge.
A building’s history is more useful for understanding recurrence. Are successive resolutions funding different projects, instalments of the same obligation, or further stages of an unresolved repair? Those situations have different implications for a buyer’s understanding of future costs.
The latest notice alone may not answer that question. Reading strata meeting minutes alongside the accounts and planned works can help connect each contribution to the decision and expense behind it.
What can buyers check before relying on a benchmark?
Start with the amount for the specific lot, then connect it to the approval, payment schedule and work being funded. The benchmark becomes useful once those details are clear.
The NSW Government’s guide to buying a strata property recommends a strata search report before buying. It describes records covering finances, building defects, planned works and meeting notes, which help explain the reason for a levy.
A practical review can bring together:
- The resolution and notices: the approved contribution, the lot’s amount and every instalment.
- The payment position: what has been paid, what remains outstanding and when further amounts fall due.
- The repair documents: the scope, estimates or quotes, and any further stages discussed.
- The wider finances: available funds, other planned expenditure and proposals still under consideration.
The NSW Government also explains that a strata information certificate, commonly called a section 184 certificate, provides information about levies payable and outstanding levies for the lot. Our section 184 certificate guide explains how that document fits into the review.
Where a sale is involved, your conveyancer can explain how the contract deals with the contribution. The size of the levy and who pays it under a particular transaction are separate questions.
What else do buyers ask about special levies?
The main distinctions are the full obligation, its place in the distribution and the building’s wider funding needs. These answers keep those comparisons separate.
What is the median special levy per unit in NSW?
The median in StrataClear’s analysis of selected completed NSW levy records was about AUD $1,200 per unit per special levy. This covers the full obligation across instalments. It is indicative context from the analysed records, rather than a representative NSW market estimate.
Is an AUD $10,000 special levy high?
An AUD $10,000 per-unit special levy is above both the median and average in StrataClear’s selected completed NSW records. About 10% of recorded obligations were AUD $10,000 or more. The amount alone does not establish whether the cost is justified or the property is a suitable purchase; the work, funding and remaining uncertainty matter.
Does the average special levy include regular quarterly levies?
No. StrataClear’s benchmarks cover the full per-unit obligation for a recorded completed special levy. They exclude ordinary administrative fund and capital works fund contributions and are not annual ownership costs.
Do apartment owners pay special levies every year?
A special levy is an additional contribution for a funding need, rather than a regular annual bill. StrataClear’s dollar distribution cannot establish how frequently a building will raise one. A buyer can review the building’s levy history, finances and planned works for context.
Put your own figure into the special levy comparison calculator, then use the questions above to investigate what the contribution covers.
StrataClear helps buyers review strata reports faster by turning complex documents into clear, structured summaries. Explore StrataClear at www.strataclear.com.au to organise special levies, fund information and planned works for faster, more informed due diligence.
Ready to understand your strata report?
Upload your strata report to get a comprehensive, easy-to-understand analysis of financial health, special levies, and critical buyer questions in minutes.
Analyse your report nowThis article is general information only and is not legal or financial advice. Laws and strata regulations change — always consult a qualified solicitor or conveyancer before making property decisions. Full disclaimer →